Aurealis Phono Cables

The cables below are Aurealis's standard phono cables.  They are exceptional value for money, and will be a big improvement over any standard cable that ships with any turntable (no matter how young or old it is).  (For turntables that use an RCA to RCA interconnect, the R3i and Duelund series of cables can also be used as an excellent phono cable. )

 

 


Aurealis RCA to RCA Phono Cable - New Spiral 2 edition released 1 February 2022

Aurealis RCA to RCA Phono Cable - New Spiral_2 edition released 1 February 2022

The new cable has greater clarity, detail and a lovely layering of vocals and instruments. 

  • copper and silver hybrid cable using stranded and solid core wire
  • Twisted pair spiral wound geometry to improve overall performance and eliminate any brightness at the top end
  • Double shielding of pure copper braid and aluminium foil
  • Low capacitance
  • Cotton and rice paper damping
  • ETI Nexus RCA - silver plated pure copper signal pin and body of tellurium copper - aluminium housing for RFI/EMI shielding
  • Includes ground cable with mini spades at each end

Larger images can be viewed by right clicking main photo and opening in a new tab.

Phono RCA to RCA

$195.50

  • Limited Availability
  • Ships within 1-3 days

Aurealis 5-Pin Plug to RCA Tonearm Cable - Spiral_2 Edition

Aurealis 5-Pin Plug to RCA Tonearm Cable - Spiral_2 Edition

This cable uses the same wiring, and offers the same performance, as the RCA to RCA phono cable but has the source end terminated in a single five pin socket tonearm connector.  22 awg ground wire included. 

 

ETI Nexus RCAs with silver-plated pure copper are used at the amp end.  The EIZZ Rhodium plated copper 5-pin connector is used at the source end. A right-angle connector can also be used - brand will depend on availability.

 

Larger images can be viewed by right clicking main photo and opening in a new tab.

Phono 5-Pin RCA

$220.50

  • Ships within 1-3 days

Aurealis RCA to Barewire Tonearm Cable - Spiral_2 Edition

Aurealis RCA to Barewire Tonearm Cable - Spiral_2 Edition

This cable uses the same wiring, and offers the same performance, as the RCA to RCA tonearm cable but has one end unterminated. Suitable for upgrading older turntables were the RCA out cables are directly soldered inside the plinth.  Grounding wire is also included.  ETI Nexus RCAs with silver-plated pure copper.

 

Image 4 shows a similar arrangement of bare wires at the end of the cable.  (Please note this image does not show the actual Spiral_2 cable).

 

Larger images can be viewed by right clicking main photo and opening in a new tab.

 

 

Phono Bare to RCA

$169.60

  • Ships within 1-3 days